Just discovered your vairous posts on the web including YouTube videos. I'm a new owner of the kx3 and loving it. I do find it a bit confusing because there seem to be many ways to use hardware and software on digi modes and not sure what's best. I do have an iPad and will follow your advice but you don't mention if you have the radio in USB mode or Psk d mode. Please clarify. Also, when I plug a 3 pole plug into the mic jack it immediately triggers the ptt so how are you avoiding this to allow you to use the radios vox function or ptt through the mic jack? I'd appreciate your suggestions.Tnx73Rick, w2 Jaz

Hi Rick,I would need to double check my notes, but denpeding on how I connect (and I don't connect anything to the iPad via the headset jack) I believe I'm using the PSK D mode. I'm now using the connection via the Pigtail (see my other video) and this requires no audio from the KX3 to the iPad. It utilizes the KX3 PSK decode via CW function. This is the cleanest setup if you have the Pigtail device. 73,JerryKD0BIK

Fab DT cards! Sorry I have had to enter twice as the first time I accidently lieknd to an old post with a completely different card! I would have removed it but I don't know how Hugs Gillian